/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.h
  * @brief          : Header for main.c file.
  *                   This file contains the common defines of the application.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2023 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include <stdbool.h>
/* USER CODE END Includes */

/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */

/* USER CODE END ET */

/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */

/* USER CODE END EC */

/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */

/* USER CODE END EM */

void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);

/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);

/* USER CODE BEGIN EFP */

/* USER CODE END EFP */

/* Private defines -----------------------------------------------------------*/
#define TEMP_Pin GPIO_PIN_1
#define TEMP_GPIO_Port GPIOC
#define DC_Pin GPIO_PIN_2
#define DC_GPIO_Port GPIOA
#define RESET_Pin GPIO_PIN_3
#define RESET_GPIO_Port GPIOA
#define SPI1_NSS_Pin GPIO_PIN_4
#define SPI1_NSS_GPIO_Port GPIOA
#define T_CS_Pin GPIO_PIN_5
#define T_CS_GPIO_Port GPIOC
#define T_IRQ_Pin GPIO_PIN_0
#define T_IRQ_GPIO_Port GPIOB
#define T_IRQ_EXTI_IRQn EXTI0_IRQn
#define TFT_BRIHTNESS_Pin GPIO_PIN_9
#define TFT_BRIHTNESS_GPIO_Port GPIOE
#define BUZZER_Pin GPIO_PIN_11
#define BUZZER_GPIO_Port GPIOE
#define BTN_Pin GPIO_PIN_8
#define BTN_GPIO_Port GPIOC
#define BTN_EXTI_IRQn EXTI9_5_IRQn
#define MOTOR_PWM2_Pin GPIO_PIN_6
#define MOTOR_PWM2_GPIO_Port GPIOB
#define MOTOR_PWM1_Pin GPIO_PIN_7
#define MOTOR_PWM1_GPIO_Port GPIOB
#define TOGGLE_LED_Pin GPIO_PIN_8
#define TOGGLE_LED_GPIO_Port GPIOB
/* USER CODE BEGIN Private defines */

#define ON								1
#define OFF								0
#define CLOCKWISE					1
#define COUNTERCLOCKWISE	0
#define PAUSE							2

#define RPM_MAX									10
#define LED_BRIGHTNESS_MAX			10
#define DISP_BRIGHTNESS_MAX			10
#define VOLUME_MAX							1
#define MODE_MAX								3
#define SLEEP_TIME							(300000)		// unit: ms
#define VOLTIMELINE							50
#define LONG_PRESS_TIME_X_150MS 10
#define PAUSE_TIME_S            1

#define TIME_TO_UPD_FLASH_AFTER_CHANGE_MS		10000


#define CLR_ACTIVE 128, 128, 128
#define CLR_UNSELECTED 253, 253, 253//0, 0, 0
#define CLR_SELECTED 6, 124, 62


typedef enum {
	BTN_RELASED,
	BTN_PRESS,
	BTN_LONG_PRESS
} btn_status_t;

typedef enum
{
  HOME = 0,
	HOME_START,
  HOME_SETTING,
	HOME_BUZ,
	HOME_LED,
	HOME_RPM,
	HOME_RPM_SET,
	
	SETTING_PAGE,
	SETTING_BACK,
	SETTING_RUNTIME,
	SETTING_RUNTIME_MIN_SET,
	SETTING_RUNTIME_SEC_SET,
	SETTING_UNIT,
	SETTING_UNIT_SET,
	SETTING_RPM,
	SETTING_RPM_SET,
	SETTING_PATTERN,
	SETTING_PATTERN_SET,
	SETTING_LIGHT_BRIGHTNESS,
	SETTING_LIGHT_BRIGHTNESS_SET,
	SETTING_DISP_BRIGHTNESS,
	SETTING_DISP_BRIGHTNESS_SET,
	SETTING_DISP_TIMEOUT,
	SETTING_DISP_TIMEOUT_SET,
	SETTING_BUZ_VOLUME,
	SETTING_BUZ_VOLUME_SET,
}SCREEN_STATE;

typedef enum
{
	FLASH_STATUS = 0,
	LED_STATUS,
	BUZ_STATUS,
	RUN_MIN,
	RUN_SEC,
	TEMP_UNIT,
	RPM_VAL,
	MODE_NUM,
	LIGHT_BRIGHT,
	SCREEN_BRIGHT,
	SLEEP_STATUS,
	BUZ_VOLUME,
}FLASH_DATA;

typedef enum {
	MOTOR_STOP,
	MOTOR_RUN,
	MOTOR_PAUSE
} motor_status_t;

typedef struct
{
  SCREEN_STATE  disp_status;
	bool 					led_status;
	bool 					buz_status;
	motor_status_t 					motor_status;
	
	uint8_t  			runtime_min;
  uint8_t  			runtime_sec;
	char 		 			uint_type;
	uint16_t 			rpm;
	uint8_t  			pattern;
	uint8_t  			light_brightness;
	uint8_t  			screen_brightness;
	uint8_t  			screen_timeout;
	uint8_t  			buzzer_volume;
	uint8_t  			disp_runtime_min;
  uint8_t  			disp_runtime_sec;
	float 				temp_val;
	uint32_t			none;
}SCREEN_Buf;

typedef struct{
	uint8_t dir;
	uint8_t timeline;
}M_Node;
typedef struct{
	uint8_t node_len;
	M_Node node[10];
}MOTOR_Hash_Map;

void Init_DISP_Para(void);
void Init_Pattern(void);

void Motor_Set_Func(uint8_t dir, uint16_t speed_val);
void RunMotorCycle(uint8_t pattern, uint16_t speed);

void Sound_Set_Func(bool status, uint8_t volume, uint16_t timeline);
void LED_Set_Func(bool status, uint8_t light_val);
void TFT_Set_Func(uint8_t brightness);
void SleepMode_Func(bool sleep, uint8_t brightness);
//void TFT_Brightness_Setting(uint8_t value);

//void SleepMode_Func(void);
void Temp_Correction_Func(void);
void FLASH_Update(void);

/* USER CODE END Private defines */

#ifdef __cplusplus
}
#endif

#endif /* __MAIN_H */