reykor_master/Core/Src/main.c

#include "main.h"
#include <stdbool.h>

#define TRUE 1
#define FALSE 0


volatile bool RL_mode = FALSE;
volatile bool LR_mode = FALSE;
volatile bool AMBERFLASH_mode = FALSE;
volatile bool REDLEDFLASH_mode = FALSE;


void SystemClock_Config(void);
static void MX_GPIO_Init(void);

int main(void)
{

  HAL_Init();


  SystemClock_Config();

  MX_GPIO_Init();


//  Initial state - all LEDs off
  HAL_GPIO_WritePin(GPIOA, Amber_LED_OUT_Pin, GPIO_PIN_RESET);
  HAL_GPIO_WritePin(GPIOA, Red_LED_OUT_Pin, GPIO_PIN_RESET);  // Changed to GPIOA
  HAL_GPIO_WritePin(GPIOA, LR_OUT_Pin, GPIO_PIN_RESET);
  HAL_GPIO_WritePin(GPIOA, RL_OUT_Pin, GPIO_PIN_RESET);
//  uint8_t slave_present = HAL_GPIO_ReadPin(GPIOA, Slave_Detect_Pin);
//
//   if(slave_present == TRUE)
//   {
// 	  HAL_GPIO_WritePin(Last_Node_Switch_GPIO_Port, feed_back_Pin, GPIO_PIN_RESET);
//   }
//   else
//   {
// 	  HAL_GPIO_WritePin(Last_Node_Switch_GPIO_Port, feed_back_Pin, GPIO_PIN_SET);
//   }

  while (1)
  {

//
//   bool  feed_back_present = HAL_GPIO_ReadPin(GPIOA, feed_back_Pin);
//    if(feed_back_present == TRUE) {
//      LR_mode = TRUE;
//    }
//    else {
//      LR_mode = FALSE;
//    }
//
//   bool  slave_master = HAL_GPIO_ReadPin(GPIOA, RL_OUT_Pin);
//    if(slave_master == TRUE) {
//      RL_mode = TRUE;
//    }
//    else {
//      RL_mode = FALSE;
//    }

//    / Update LED states based on current mode /
	  // just checking the inbuilt git
    if(AMBERFLASH_mode) {
      HAL_GPIO_WritePin(GPIOA, Amber_LED_OUT_Pin, GPIO_PIN_SET);
      HAL_GPIO_WritePin(GPIOA, Red_LED_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, LR_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, RL_OUT_Pin, GPIO_PIN_RESET);
    }
    else if(REDLEDFLASH_mode) {
      HAL_GPIO_WritePin(GPIOA, Amber_LED_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, Red_LED_OUT_Pin, GPIO_PIN_SET);
      HAL_GPIO_WritePin(GPIOA, LR_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, RL_OUT_Pin, GPIO_PIN_RESET);
    }
    else if(LR_mode) { // comment added
      HAL_GPIO_WritePin(GPIOA, Amber_LED_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, Red_LED_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, LR_OUT_Pin, GPIO_PIN_SET);
      HAL_GPIO_WritePin(GPIOA, RL_OUT_Pin, GPIO_PIN_RESET);
    }
    else if(RL_mode) {
      HAL_GPIO_WritePin(GPIOA, Amber_LED_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, Red_LED_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, LR_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, RL_OUT_Pin, GPIO_PIN_SET); 	//this line was to check whether the interrupt is working  fine or not

// updated section here the mode is changed to output since the slave acts as origin of input

      GPIO_InitTypeDef GPIO_InitStruct = {0};
      GPIO_InitStruct.Pin = feed_back_Pin;
      GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
      GPIO_InitStruct.Pull = GPIO_NOPULL;
      HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
      HAL_GPIO_WritePin(GPIOA, feed_back_Pin, GPIO_PIN_SET);
      GPIO_InitStruct.Pin = feed_back_Pin;
      GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
      GPIO_InitStruct.Pull = GPIO_NOPULL;
      HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);



    }
    else {
      HAL_GPIO_WritePin(GPIOA, Amber_LED_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, Red_LED_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, LR_OUT_Pin, GPIO_PIN_RESET);
      HAL_GPIO_WritePin(GPIOA, RL_OUT_Pin, GPIO_PIN_RESET);
    }


  }

}


void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  __HAL_FLASH_SET_LATENCY(FLASH_LATENCY_0);

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV4;
  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
  RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
  {
    Error_Handler();
  }
}


static void MX_GPIO_Init(void)
{
  GPIO_InitTypeDef GPIO_InitStruct = {0};

  __HAL_RCC_GPIOA_CLK_ENABLE();

  HAL_GPIO_WritePin(GPIOA, RL_OUT_Pin|LR_OUT_Pin|Red_LED_OUT_Pin|Amber_LED_OUT_Pin, GPIO_PIN_RESET);

//  / Configure GPIO pins : Amber_IN_Pin Red_IN_Pin LR_IN_Pin RL_IN_Pin /
  GPIO_InitStruct.Pin = Amber_IN_Pin|Red_IN_Pin|LR_IN_Pin|RL_IN_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;  // Changed to detect both edges
  GPIO_InitStruct.Pull = GPIO_PULLUP;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

//  / Configure GPIO pins : RL_OUT_Pin LR_OUT_Pin Red_LED_OUT_Pin Amber_LED_OUT_Pin /
  GPIO_InitStruct.Pin = RL_OUT_Pin|LR_OUT_Pin|Red_LED_OUT_Pin|Amber_LED_OUT_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

//  / Configure GPIO pins : feed_back_Pin Slave_Detect_Pin /
  GPIO_InitStruct.Pin = feed_back_Pin|Slave_Detect_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

  /* EXTI interrupt init*/
  HAL_NVIC_SetPriority(EXTI0_1_IRQn, 2, 0);  // Changed priority to 2
  HAL_NVIC_EnableIRQ(EXTI0_1_IRQn);

  HAL_NVIC_SetPriority(EXTI2_3_IRQn, 2, 0);  // Changed priority to 2
  HAL_NVIC_EnableIRQ(EXTI2_3_IRQn);


}


void HAL_GPIO_EXTI_Rising_Callback(uint16_t GPIO_Pin)
{
  if (GPIO_Pin == Red_IN_Pin) {
    RL_mode = FALSE;
    LR_mode = FALSE;
    AMBERFLASH_mode = FALSE;
    REDLEDFLASH_mode = TRUE;
  }
  else if (GPIO_Pin == Amber_IN_Pin) {
    RL_mode = FALSE;
    LR_mode = FALSE;
    REDLEDFLASH_mode = FALSE;
    AMBERFLASH_mode = TRUE;
  }
  else if (GPIO_Pin == LR_IN_Pin) {
    RL_mode = FALSE;
    AMBERFLASH_mode = FALSE;
    REDLEDFLASH_mode = FALSE;
    LR_mode = TRUE;
  }
  else if (GPIO_Pin == RL_IN_Pin) {
    AMBERFLASH_mode = FALSE;
    REDLEDFLASH_mode = FALSE;
    LR_mode = FALSE;
    RL_mode = TRUE;
  }
}

void HAL_GPIO_EXTI_Falling_Callback(uint16_t GPIO_Pin)
{
  if (GPIO_Pin == Red_IN_Pin || GPIO_Pin == Amber_IN_Pin ||
      GPIO_Pin == LR_IN_Pin || GPIO_Pin == RL_IN_Pin) {
    RL_mode = FALSE;
    LR_mode = FALSE;
    REDLEDFLASH_mode = FALSE;
    AMBERFLASH_mode = FALSE;
  }
}


void Error_Handler(void)
{

  __disable_irq();
  while (1)
  {
//    HAL_GPIO_TogglePin(GPIOA, Amber_LED_OUT_Pin | Red_LED_OUT_Pin);
//    HAL_Delay(500);
  }
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{

  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

}
#endif